This PoE+ HAT is compatible with:

  • Raspberry Pi 4 Model B 8GB
  • Raspberry Pi 4 Model B 4GB
  • Raspberry Pi 4 Model B 2GB
  • Raspberry Pi 4 Model B 1GB (discontinued, but still compatible)
  • Raspberry Pi 3 Model B+
  • Compute Module 4 with the official CM4 IO Board

Features:

  • Standard: IEEE 802.3at-2003 PoE
  • Class 4 device
  • Fully isolate Switched-Mode Power Supply (SMPS)
  • Input Voltage: 37-57VDC
  • Output Voltage and Current: 5VDC, 5A
  • Output Power: 25.5W
  • Transformer Type: Planar
  • 25mm x 25mm brushless fan delivering 2.2 CFM for processor cooling
  • Fan Control
  • Operating Temperature: 0ºC to +50ºC
  • Plug-and-play compatibility with: (latest Raspberry Pi OS)
  • Raspberry Pi 4 Model B 8GB
  • Raspberry Pi 4 Model B 4GB
  • Raspberry Pi 4 Model B 2GB
  • Raspberry Pi 4 Model B 1GB (discontinued, but still compatible)
  • Raspberry Pi 3 Model B+
  • Compute Module 4 with the official CM4 IO Board
  • Dimension: Same as the earlier version of PoE HAT, 65mm x 56.5mm

Connecting your PoE+ HAT to the Raspberry Pi

  • Before installing the PoE HAT, you must attach the supplied spacers in the four corners of the board
  • Then connect the Raspberry Pi PoE+ HAT to the two 0.1” headers (40 + 4) that are fitted on the Raspberry Pi
  • Once the PoE HAT board is connected, you can power the Raspberry Pi through its RJ45 network connector

Disconnecting your PoE HAT

  • Be cautious when separating the HAT from the Raspberry Pi, especially the 2x2 female header on PoE+ HAT.
  • Pull evenly so that it detaches from all the pins at the same rate; do not pull one end of the connector off before the other

Additional information
No modification to the main Raspberry Pi board is needed for this product to work. Please ensure that your Raspberry Pi software is up to date for all functionality to be available. The PoE+ HAT is fitted with a small fan that is controlled by the Raspberry Pi via I2C. The fan will turn on and off automatically depending on the temperature of the main processor on the Raspberry Pi.

Specifications:

  • 802.3af PoE
  • Fully isolated switched-mode power supply
  • 37–57V DC, Class 2 device
  • 5V/2.5A DC output
  • 25mm x 25mm brushless fan for processor cooling
  • Fan control

 

(RAS5010)

SKU RAS5010
Brand Raspberry Pi
Shipping Weight 0.0450kg
Shipping Width 0.075m
Shipping Height 0.023m
Shipping Length 0.075m

Be The First To Review This Product!

Help other Cairns Electronics users shop smarter by writing reviews for products you have purchased.

Write a product review